Need to order a custom Wall Liner? No problem, simply download the form and fill out and send through to your nearest Symphony Showers retailer to get a quotation for your requirements.
How to Buy?
The first stage of ordering a liner, is to get a quote, and to do this we will need some information.
- Please read the measurement guide below carefully, then download the form
- Fill out the form and take it down to your local Symphony retailer
- The friendly staff in the bathroom department will send us your information, and we will send through a quote
Custom Wall Liners
At Symphony Shower Systems we can manufacture a large range of custom sized wall linings. Our only limitation is the size of the acrylic sheet: our maximum sheet size is 2000mm high x 3535mm wide. Getting a liner manufactured is easy, and only takes 3 days from the day of ordering to dispatch.
Please run through the steps below and ensure that accurate measurements are provided.
Ordering a 3 Sided Liner
Check that the walls are plumb and level. Liners do not have adjustment in the corner folds, and we cannot fold liners with unequal width walls. If your walls are unequal in width by more than 5mm, we suggest packing the wall linings to plumb. Any distance lower than 5mm, additional glue can be added to “pack the liner”.
Ordering a 2 Sided Liner
Measure the distance from the internal corner of the walls, out to the edge of the shower area you wish to line. If your walls are not plumb and level to the tray, the wall liner will have to be trimmed along the bottom to meet the tray correctly. Trimming will have to be done on site prior to installation onsite by your installer. We cannot fold to suit this irregularity.
When fitting a custom wall liner, the liner must be installed onto new UNPAINTED and UNPLASTERED Aqualine GIB Board. We recommend Sika Shower Bond, and Sika NG Silicone for liner installation.
Our custom wall liners are available in standard flat wall but also in a functional moulded wall.